home *** CD-ROM | disk | FTP | other *** search
- Path: thales.nmia.com!usenet
- From: JScotto@Wazoo.Com (John scotto)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: HELP!!!! G-FORCE 3000 28 MHz Problems
- Date: 29 Feb 1996 13:56:14 GMT
- Organization: New Mexico Internet Access
- Message-ID: <1905.6632T1402T1093@Wazoo.Com>
- References: <4h14jv$m9n@crl9.crl.com>
- NNTP-Posting-Host: blue.wazoo.com
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- >As you can see by the Title I am in desperate need for help. I just
- >installed a G-force 3000 28 mhz 040 board.
-
- >My problems is that it crashes all the time. I dont know what to do.
-
- >it does not matter what program i select it will crash.
-
- >my system is as follows
-
- >A3000 28 MHz 040
- >OS 3.1 with ROMS
- >Super Buster Rev. -11
- >Ramsey Rev -7
- >12 megs ram (2 megs chip 8 fast and 2 on 040 card)
- >2 hard drives, one 540 and a 52 meg
- >CD rom
-
- >I thought it might of been in my WBstartup but I dont think so now, since
- >I can crash everytime no matter what program I click on. IS there a more
- >up to date patch that I can put in? This is a old board.
-
- >Should OS 3.1 be a stable operation system? I would like to email the
- >person I bought it from so I can get some kind of help but I dont see
- >that in the near future.
-
- What do you mean. I am more than willing to help.
-
- I cant get into my system..what good is it if I
- >cant use my computer?
-
- >Help me. If you need any more information, Please feel free to ask me..:)
-
- >I dont know, I kinda think it may be the patches that GVP gave with the
- >disks. I can call and find out.
-
- >Thanks,
-
- >chris
-
- >email me at yogi@crl.com
-
- Hey Chris,
-
- I have replied twice via e-mail and two messages on your answering machine within
- one hour of receiving your message. I have emailed a list of things to check
- and steps to take in sequence.
- I had this running without error in an A3000 with 3.1 in rom until one hour before
- I shipped it to you. Please double check all of the software in accordance with the
- manual. Check against the list I e-mailed (and left on your machine) try restoring
- your machine to its original config and see if it runs. Then replace the GVP without
- the new chip you e-mailed me about. Please keep me informed and return my phone
- calls if you need more help.
-
-
- Sincerely,
-
- John Scotto
-
- JScotto@Wazoo.Com
-
-
-